Thread
:
CLU got wet, no start, then started, now no
View Single Post
DMadigan
Registered
Join Date: Jul 2012
Posts: 138
Checked the power from the ignition switch to the start relay and jumpered the output of the relay to the starter. That works.
The DME is not powering the Rear Support Relay.
Got the top open by putting power to the top motor at the relay contacts.
01-25-2022, 12:10 PM
Pelican Parts Catalog
|
Tech Articles
|
Promos & Specials
#
2
(
permalink
)
DMadigan
View Public Profile
Find More Posts by DMadigan