Quote:
Originally Posted by joshuars
Firstly I did search this forum plus research other forums and I'm really confused.
Own 75 G model which I want restmod to 73 RS model.
This of course mean few things
1. Changing rear 3/4 panels , they are rusty and dmagae anyway then I want get new ones..
Dansk I can't find one which will be matching RS ( I don't care about thickness of the panel)
2. Front i need change fenders and trunk to long one from what I did found out.
I did found the whole conversation setup for like 8-10k but that it's out of the question due to budget.
Is Dansk /JP have any parts which will be exactly this same as 73 RS but fit on G model ?
Of course with conversion of the front...
Or anyone from Europe can advise where I can find this parts.
Wysane z mojego M2101K9G przy uyciu Tapatalka
|
I just completed this on a budget.
$350 for front latch panel
$150 for replacement light box frames ( just bottoms)
New or used light boxes and lenses say $500 $600 ish.
$10 of 20 gauge steel for front fender extensions.
$15 of 20 gauge for front hood extension .
$500 rear rs bumper gt racing ( had to cut 3/8 inch from each side glass back together.
$400 front s bumper
$100 $200 Horn grills
New seals et et I’m sure I left something out.
Of course you’ll need a metal shrinker, bead roller and English wheel for hood and fender extensions and a mig or tig preferably tig.
You’ll also have to do some cutting of stock bumper mounts et.
Bumpers can vary greatly in cost quality et Getty Design being more pricey but better quality.
I’d use steel flares in the back and fiberglass up front.