|
Registered
Join Date: Sep 2001
Location: Indianapolis, IN, USA
Posts: 13
|
One of my neighbors helped me figure this out and thought I would post it since there were a lot of reads but no responses. I am assuming no one knew the answer. Anyhow, the '75 is very different. There are no screws, the assembly is held in place by 2 c clips on the steering column. Once removed there is another cap that comes off and then the whole thing slides out. When putting it back in, there is a spring loaded piece that must be depressed to get it to slide over the steering column.
__________________
'75 914 1.8
|