View Single Post
Henry Schmidt Henry Schmidt is offline
Try not, Do or Do not
 
Henry Schmidt's Avatar
 
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 14,101
Garage
We have used Zenith carbs on everything up a 3.0. The problems you will run into are:
Poor jet selection. We used jets from the Solex 40 P11 (365 & 912) and jet drills.
No venturis. We use modified Weber venturis
Lean running and pore tuning when decel device was left in place. We removed it and plugged the holes with allen set screws.
When all these modifications are performed the carbs work as good or better than Webers.
However I would recommend a new set of PMO's.
Or of course the MFI is my first choice.

Time Certs in the heads will work to install injectors and the Supertec Enrichment devise will eliminate cold start and heat riser issues.
__________________
Henry Schmidt
SUPERTEC PERFORMANCE
Ph: 760-728-3062
Email: supertec1@earthlink.net

Last edited by Henry Schmidt; 10-22-2004 at 10:28 AM..
Old 10-20-2004, 09:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)