|
Registered
Join Date: Mar 2004
Location: S.E. Pennsylvania
Posts: 1,967
|
Set the plug gap to .031 INCHES or .80mm and you'll be just fine.
On the metal base, what are your numbers? W8d? or W145T30?....
Swapping out the dizzy cap and rotor is pretty straight forward. Make sure the rotor seats properly on the dizzy shaft. The cap: I recommend that you replace one wire at a time to ensure the correct firing order.
You'll be just fine
__________________
The Fox
Carrera
Last edited by kqw; 01-22-2005 at 08:19 AM..
|