|
Registered
Join Date: Feb 2001
Location: Aircooled Heaven
Posts: 1,054
|
Imagine that...Thats why they are so cheap...
If you measure the radial, and longitudinal axis of the cylinders you will really be scared...Check the skirt clearance too, if it is more than .003 you are too lose...
With cylinders you get what you pay for, we use ONLY German 94 mm cylinders to make into our 96 sets....All the aftermarket cylinders take lathe and hone work to get close. I use over 100 sets per year, and know the differences..
|