i just installed a set of Nology hot wires on my 82 sc 3.0 this morning. went to fire it up and it runs like crap. re-checked all wire to cap placement and they were spot on. #one aligned with the rotor aimed to-wards the notch, then six ,two,four,three, five running anti-clock wise,pushed and twisted each lead into the cap to make sure of good contact. pulled all six off the plugs and pushed them back down until i could hear and feel the plug caps hit home. it runs like I've misplaced wires on the cap but i have checked it three times now. the plug ends are very difficult to push over the plugs and I'm thinking that this is my problem. I'm contemplating cutting the tips of the plug ends off as they really make you push hard to force then over the spark plug body's. has anyone else experienced this with these wires?
