[John Rogers]

Mike's right, I just went through a week of Alt/volt reg problems and I finally bought a new sealed batt, rebuilt Bosch alt and Bosch voltage reg. I found that a bout a minute of 15 to 16 volts going to the batt will fry it, even a sealed batt. I'd recommend washing the batt tray area really well with baking soda solutiuon a couple of times and drying it well. Then I'd buy all three since if one part goes bad, then all the others are over stressed and will fail shortly. This might also be a good time to check the cables and put some 3 ga cables in. Good luck.