Quote:
Originally posted by david914
I can tell you from my experience that those screws are difficult to get in right. The angle is critical. Pay close attention and make sure the screw is approaching the nut in the headlight bucket at exactly the right angle. Also, make sure the screw threads are "clean" and not "buggered up". Test the screw fit with the headlight out first to be sure they thread in easily.
As far as your wheels are concerned, I think you need a set of Fuchs! 
|
Yeah I thought the angle migt be messing things up. I could never get it started. With the light out, it seemed that angle was such that it would be next to impossible to get a screwdriver on that bugger without scratching my paint! I wondered about maybe trying to bend the tab in the bucket up a bit to see if that helped.
As far as the Fuchs go, got a deal working and hope to have them on by the end of April.
I also think I need to paint the trim rings to match.