OK guys, I need some help pricing a collection of junk I bought. I need to get some appropriate numbers before I put it all on the FS Forum.
1967 912 Karmann coupe VIN 458xxx
Complete without engine or transmission (has a VW in it and drives).
Has conversion to late (’74->) bumpers, fenders and doors.
Whale tail.
Aftermarket seats.
Fake BBS wheels.
911 oil tank installed.
Has ’66 911 wood dash.
The chassis is the most rust-free I have seen in 4 decades. There is absolutely no sign of rust at the doorjambs, front pan, etc. There is one rust spot on the cowl at the windshield gasket passenger side, probably from being washed and not driven.
This chassis should go to a 1967 911S that is a nice, complete original car but has a rusty chassis. This swap would save someone $30K+ and be more original than a proper chassis repair.
The inventory of parts that need to come off and be sold are:
Late bumpers, F&R
Late fenders.
Short hood
Whale-tail
Complete doors.
Seats
1600 VW eng & trans (I'll post this on thesamba)
1968 912 Karmann coupe VIN 1280xxxx
Stripped interior with full cage installed. Unknown if it complies but looks proper.
No engine or transmission.
Late front suspension, standard SWB rear suspension.
911 oil tank installed.
FRP fenders, hood, ducktail, bumpers (has the steel parts also).
The OE parts are:
Bumper.
Hood
Deck lid
Chassis looks nice, no obvious crash or rust.
This is an unfinished project car.
This is a perfect start for a 2.0 vintage racer or to replace a crashed race chassis.
1974 911S Targa VIN 911431xxxx
Fender damage LR, white/chrome, paint acceptable.
No engine or transmission.
Perfect Targa top.
No signs of rust or crash damage (I’ll inspect further.)
Everything else looks nice and original
The question on this car is it worth more in parts or as a roller?
I’m going to keep a few bits & pieces (<3%) to help with my posts on the forums. All I want is to break even otherwise.
This is the first Porsche stuff I have bought in more than 20 years and
I NEED HELP pricing.
Thanks guys.
Best,
Grady