I think you will have to purchase an entire head light assembly either from a salvage yard or new from various parts suppliers. It appears the mounting flange has been broken-off. The lense is silicone glued to the reflector and should not be removed. To clean the lense you have to remove the bulb assembly and then fashion a swab, sort of a large Q-tip, I used a piece of old T-shirt wrapped around a 3/8" wood dowel, then apply a good glass cleaner that will leave no residue, then pass thru the bulb opening, swab the back of the lense. It is tedious, but be careful, with patience you can even get the reflector clean, it's finish is delicate and can be scratched easily so don't push too hard.
[This message has been edited by movin (edited 07-07-2001).]
|