[craign]

Here are some I have from the Maestro's "little spec book"

12mm ATF nuts on 3rd piece of case - 15 ft/lbs

Case perimeter bolts - 15-18 ft/lbs

Connecting rod nuts - 32.6 ft/lbs

Acorn nuts on case - 29 ft/lbs

Cylinder head nuts - 22 ft/lbs

Rocker arm housing - 29-36ft/lbs

Rocker arm to shaft nuts 15-18ft/lbs (might strip nut near 18)

flywheel nut - 324-360 ft/lbs

generator to fan nut - 72 ft/lbs

cam gear bolts - 18ft/lbs

most 8mm (12, 13, 14mm) - 15-18ft/lbs.

This has been a pretty good little book to have handy I highly recommend purchasing it!

I hope this helps........

craign