View Single Post
Scuba Steve Scuba Steve is offline
Registered
 
Join Date: Nov 2004
Location: Charleston, SC
Posts: 2,357
Quote:
Originally Posted by drew1 View Post
Trying to remember, but I think the pasenger switch feeds from the passenger switch on the drivers side & if either is bad the motor won't run. Since the passenger door panel is off, you may be able to check both of these switches from that side. From memory these switches have a six pin connection, sound rigth?
True. I had a dirty switch, and either way they were installed the drivers side was the only one that would move up or down. No voltage at the passenger side when the drivers side switch was removed.

I'd recommend giving both a good shot of contact cleaner, and if that doesn't work take a peek inside (go slow and be careful that the small springs don't fly away)
__________________
'87 924S (Sold)
Old 02-13-2008, 09:04 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)