|
Registered
Join Date: Aug 2002
Location: Galivants Ferry, SC
Posts: 10,550
|
There is a tech tip or tech bulletin about installing (basically) a rubber band to give the shift linkage a bit of sideways preload to get rid of an annoying rattle. The "O-ring" is part number 999 701 969 40 and it slides over the shift rod. Those of you who have the Parts and Technical Reference Catalogue...and can scan a pic....this is shown on p.48 with a brief description of how to do it.
But...it could also be an early slave cylinder problem. The newer part is 950 116 237 11 and it can be ID'd by the extended rubber boot it has with an installed spring inside. Also to ward-off G50 rattle tendencies. And...can also be found as a tech tip w/ pics on p. 66 of said Tech book.
__________________
Wil Ferch
85 Carrera ( gone, but not forgotten )
|