[AntonLargiader]

With the key in the on position, use a thin pick or a bit of stiff wire to push into the slot on the front left edge of the ignition lock housing. It's directly on the left side of the rib that runs along the front of the housing. This will let you extract the lock cylinder and key (just pull them straight out). Then use a screwdriver to turn the switch in the bottom of the lock housing.

The bottom of the lock cylinder has a metal plunger that keeps it in the housing. You need to press that inward (through the slot) to lift the cylinder out. You can only do this with the key in the on position.