[thekidd]

Thanks. I just closed up Clarks speed/ reference sensor page, and looked here, and re-read it again. Well, I will just replace the sensor wires because if were to take the bracket out, I dont know if I will have a "whole day" to do the adjustment on it. I will play it as it goes I guess.

EDIT- I lied about getting the sensors out. I thought that I broke free the speed sensor (one closer to firewall) and would get it out later. I guess I didnt break it. I tried to use a socket wrench, I can get it on, but no room to loosen, just wiggle. I have been trying another way by putting on the 10mm hand wrench (Clarks says 8mm, but wont fit, noe does 9mm) and use a hammer as an extension, and using a 4lb mallet to try and loosen it. Still no go.