|
idle
Thanks for the links on setting the mixture. I'm going to have to read through them a few times. I will check the timing tonight and report back. I was turning 1/4 and 1/2 turns. I see I may need to have a smaller turn like 1/8 to get it dialed in. I might have gone a little too rich on the last turn as the idle is not so steady. However, it does move throught he higher rpms better.
A quick question on control pressure from the WUR. Mine is currenlty at 52 psi which seems to be about right according to the tech specs and a couple of Bosch manuals I have. I read a WUR fix pdf document that said to set it between 40-46 psi? Any comments? That would definitely change things with mixture setting.
Thanks
|