I have some fitment issues.
1) The first is the PUIG, which I had to flatten out so it fitted into both sides of the front fairing (it comes narrower than the old screen)
I wonder if that will cause it to crack due to stress? Anyway that bit on the front looks ordinary and the sides don't fit snug.
I remember that some people got the Dremel out and made theirs fit better - any advice? I don't want to chop it up and make a mess!
It doesn't fit too good there you can see the gap between the edge of the fairing and the screen. The lugs don't fit properly either and what is the plastic hose for?
2) Ilmberger Belly Pan. I can't get the left hand rear attachment to attach without it interfering with something, have I fitted the other points to the right spots? You can see where it would like to go with my finger but do I need to get a longer bolt and a nut? the side stand rubs on the pan if I put it there and I think the gear lever catches it too.
3) Rear HPE Carbon shroud. It looks like it wants to sit under the rear fairings nice and snug but it wont. Is this how they fit? It's a bit ill fitting.
Kieran I know you said to ask if I had any problems but I thought I'd do the asking all in one hit, with the screen as well.
All contributions large and small gratefully received.