View Single Post
Helmsy Helmsy is offline
Registered Driver
Helmsy's Avatar
Join Date: May 2008
Location: South Australia
Posts: 281
Not sure if all are wired the same but here goes.

The red wire (mine has a white stripe) which used to go to the original CDI (in the 6 pin plug) is switched power. I used this for the switched power for my MSD through the 3 fuse panel.

I found that the wire which provided power to the CDI comes from the front of the car via fuses but also via the delay relay in the rear. I removed the realy and jumpered the terminals and bammo the switched red/white wire works again.

Guess I'll need to buy another delay relay.

Thanks for the help guys.
'85 930 - Black on Black
'95 993 Turbo - Silver

Last edited by Helmsy; 11-17-2009 at 07:05 PM..
Old 11-17-2009, 07:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)