Quote:
Originally Posted by TibetanT
Not sure here, but are you talking about the speed and reference sensors?
If you removed these, you may have put them back into the wrong spot. Try switching there positions to see if that helps.
BG = Reference mark sensor
DG = Speed sensor
There should be labels on these cables near the top where they connect to the harness. On the block, where there should be marks showing B and D.
Hope this helps.
|
That was the first thing that came to mind to try. And yes I'm referring to the sensors on the bell housing. I didn't take the sensors themselves out but instead the block with them still in it.
I did try to take out the sensor to closest to the front of the block but it wouldn't budge so I put the bolt back in it and continued to fiddle with the entire block assy.