View Single Post
Zeke Zeke is online now
Never left, but not right
 
Zeke's Avatar
 
Join Date: Jan 2002
Location: Long Beach CA
Posts: 31,121
I don't know about a complete assembly proceedure to be found anywhere, but I believe I would put the painted cover on the headlamp sub-assembly and install together with the socket head screws. It helps to have the turn signal lamps out at the time. Then connect motor. You ought to be able to see how the motor installs once the cover and sub-assemblys are in. Also, I think you should install the actuating arm before dropping the assembly into the well. You should be able to install the lamp, ring and shroud from the outside once everything else is in place and in the up position.

Hope that will get you started. Tape soft towels aroud the area to prevent scratches. Don't be afraid to do it twice. A lot of things get done twice.
Old 09-26-2002, 07:34 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)