Quote:
Originally Posted by jeffdyer
I need to replace the crank case oil temp sensor - you know the one with the green/black wire coming from it.
Is it safe to do this without draining the oil? This would make a 10 minute job a 60 minute job. I suspect that a good layer of paper and rags underneath the sensor hole and a quick in/out would not lose too much oil!
Any thoughts appreciated....
|
Jeff,
Please be more specific in your questions and you'll get a better response. What year and model is your car? Give this information and it will make a lot of sense to readers.
A lot of these guys are very good but they are not mind readers!!! Thanks.
Tony