|
Registered
Join Date: Aug 2008
Location: sectors R&N, SE Pa
Posts: 3,117
|
I got these long q-tips that some modelers use - cotton swabs on wood - wet the ends in carb cleaner and went around the recess. Of course I was careful and lucky they didn't fall in, and they were long enough to fish out if they did drop. The other trick was to try to not break them (the wood was a bit brittle).
Let it dry thoroughly.
__________________
Dan
'87 Targa Carrera 3.2 - Fabspeed Cat Bypass, M&K Muffler, SW Chip
Venetian Blue
|