|
Registered
Join Date: May 2003
Location: Manhattan Beach, CA
Posts: 2,350
|
The value is not that critical. One can also use a 100 ohm 2 watt (V^2/R, where V=13 before start). In some cases though, a 56 ohm 3 watt may be necessary. It's best to test the resistor before final
installation. Then simply just solder the resistor to the bulb spade pins directly.
__________________
Have Fun
Loren
Systems Consulting
Automotive Electronics
'88 911 3.2
'04 GSXR1000
'01 Ducati 996
'03 BMW BCR - Gone
Last edited by Lorenfb; 03-26-2012 at 07:42 AM..
|