|
Registered
Join Date: Jul 1999
Location: Boulder, CO, USA
Posts: 392
|
Help! need fast rebuild advice
I just found out my 2.0L case is shot. I have another early 1.7L case (heads have the small pushrod tubes) and I'm wondering if I can use that. The machinist said I need "30 under rod bearings for the 2.0L crank" and "10 under" main bearings. My questions are:
Can I use the 1.7L case for a 2.0L rebuild?
Is this crank too far gone or can I try using the 30 under bearings?
Thank you very much!
Ben
|