|
Runs rough with new tbelt ??? Help
Hi everyone its been a while but i finally got her running after my tbelt disaster.I have some issues and need some help
#1 I installed a new tbelt and after sitting over the winter it idles fine but when i get on the gas it boggs down and backfires over 2500 rpm. I checked the timing marks after running the car and everything looks dead on. It had almost no gas in the tank and put 5gal of fresh fuel. By accident i did go to charge the batt and put the charger on the wrong posts while charging the batt. (I know rookie mistake) Im thinking maybe a fuel issue, the fuel pump in the back was making a loud buzzing noise louder than normal????.
#2 when removing the locking tool on the flywheel i forgot how the slave cyl goes back in. There's a round piece with a point on the outer end and it looks like a ujoint end cup. sounds silly not to remember but started doing the job last sept and i dont have a garage so i had to wait till summer.
(do i need any special tools to bleed the slave cyl.)
__________________
1979 928 5 speed 90k
Last edited by john 928; 07-07-2012 at 10:23 PM..
|