Quote:
Originally Posted by JAR0023
This is the evaporator fan. OP said condenser fan. Assuming condenser up front behind the bumper next to the spare and jack. There are two (actually three) different. Behr fans for the condenser. Third is really early and I've only seen in PET.
Second two seem interchangeable. Earlier SCs had a metal case and the plastic snorkel that feeds through the bulkhead is a separate piece. Later Behr fan was all plastic with the snorkel section molded in. IIRC the later two are interchangeable. Same hole in floor and front bulkhead.
Evaps changed as well. IIRC 85 is the change over. I know 84 down are one way and 86 up another but I can't remember which way the 85 falls.
-J
|
Correct, I just deleted my post.
The pet does not list the front condenser fan motor as a separate item.
I think the front condenser fan is sold as an assy.
Both evaporator and condenser fan motors are available from our host.
Also, I was advised that the evaporator blower motor
is also compatible with the front condenser blower motor.