[BRose]

If your pedal is stayin on the floor and not coming up then you have a bad slave cylinder or a leak in the line that runs from the master to the slave or a leak in the master. I had to get all three replaced! A tiny hole in the metal line that runs from the master to the slave was the culprit. A BEAR to replace and the dealer wanted $175.00 for the line alone. See if any fluid is leaking under the car and check the reservoir level where the brake fluid goes. If its down or low that probably where to start first. If it is the clutch then welcome to the world of Porsches and a hefty $1200 - $1900 clutch job. good luck

BR 1985.5