[bell]

That one is pretty Strait forward, yes the orange o ring part seats into the engine.
There is a year or 2 where it uses the updated aos which looks like that but it also changes the length is the pipe which goes to the throttle body so you'd need to use the updated pipe as well, but I don't recall the year..... there should be info on Pelican as our shops part supplier uses the same program and it tells you you need the pipe when changing to the updated aos..... the original pipe ends up beingabout an inch too short.... so look into that.

Next to the orange o ring port is that small pointy port, that has a simple spring clamp/hose which it connects to, but it's easier than the below, there isa bracket that holds the cam sensor wire next to it which will make it slightly easier to access if you unbolt it, this wire can also get pinched by theaos so watch it closely when installing