|
Project Addicted
Join Date: Jul 2012
Location: Eastern Shore. MD
Posts: 919
|
Very thin coating of grease on the splines. Clutch disc and pilot bearing my be aligned perfectly. You need to get the splines to engage properly. Rotate the shaft slightly after each try to get them in a diff position each time you try. I have had to put the trans in gear and rotate on axle flange (while holding the other) to get it to slip in. This makes it a 2 person job....
__________________
Jon
1966 912
1976 911 3.4 Backdate Project
1986 944
|