|
Air pressurize cylinder with piston at tdc (both valves closed). Drill for helicoil (air pressure will blow cuttings back in your face) - use heavy grease on tap to capture "shards". Aluminum shavings will probably vaporize at combustion temps anyway (1400-1600 degrees).
OR
JB Weld it in.
__________________
"Inventor - Blue Flame 914 Seat Heater"
"Yellow Rusty Cars Are Faster"
_____________________________
'70 2.5 (I'll never finish it - Somewhere over the rainbow.....,)
'73 2.0 (Just Not The Same)
'74 2.0 (Heartless & Lungless)
|