I picked up a new project almost 2 years ago.
Here are some picture of the inside.
Here are some pictures, before I got started on it
In the meantime, a few weeks back, I made some progress, put it on the lift. Removed the engine and transmission.
Looks like 45 years of dirt
I had some issues with the clutch fork to get out. One of the 3 pins to release the clutch just snapped off.
OK, plan "B", just loosen all bolts which hold the clutch to the flywheel, and take out the transmission with the clutch included. Damn, one of the 12 point socket head bolts just turned round.
OK, now plan "C" Hammer and chisel. Finally got it out.
OK, the engine is now on the stand, and it was time for a beer.
Cheers
Engelbert