Porsche Engine number Identification Help

[adelgado]

Hi there,

I really need some help decoding this engine. Here is the identification number and Type. I would like to know if this number corresponds to a 930 3.0, 3.3 Turbo engine or not and what year it is.
Engine identification number: 6452294
Engine Type: 930/68

I have been looking at the web and haven't had found a clear answer.

I added some pictures so you can check if the numbers and letters look correct.


Thanks so much for the help

[fabregas]

1986 Model Year – G Series Cars

Production of the 1986 model year G-series 930 got underway in September 1985. It featured new Bosch LE-Jetronic fuel-injection, 9-inch wide rear wheels (up from 8-inches), a subtly reworked dash fascia, sun visors with covered vanity mirrors and front seats mounted a little lower than before. Thanks to the arrival of a new emissions friendly Type 930/68 engine, the 911 Turbo was re-introduced to the US market after a five year absence. Equipped with a three-way catalytic converter, Lambda oxygen sensors and DME engine management, the US-spec. Type 930/68 motor produced 282bhp at 5500rpm and 288lb-ft at 4000rpm. With the 930 now available in the US again, production surged to 2670 units, over half of which were sent across the Atlantic. Turbo SE (Special Equipment, slant-nose, option M506) limited edition available as special order, with 330bhp.