These two stubs don't want to budge, even with heat, and PB blaster. As the pic shows, the longer one is bent at the threaded section from a good whack with a hammer. They measure:160 mm X #10, and 125 mm X 10. Our host does not have a listing for them. Any one out there have these or know of a source ? Philip
__________________
87 930 GHL/Rarlyl8/Garretson/GT3582R/1 Bar/Wevo shift, mounts/Meth inj/LM-2/Custom Fuchs/Carrera intake manifold/Xtreme Carrera heads P&P/3.4/DR 993SS cams/ Mahl/Pauter/JE/Niresist/ARP/twin COP/8.25:1/KEP stage 2/twin tials/close 2,3,4th. MS3Pro Evo
500+ HP, BTSOMP Dyno
12-30-2011, 09:35 AM
