Please confirm my coil is wired up correctly.

[cellison]

Could someone please conform my coil is wired correctly? i labeled them when i took them off but maybe got one crossed up.

1.) 1 have 1 brown/white stripe wire (one connector) and a white (another separate connector) both from the same wiring harness to the coil. i had both of these on the negative pole on the coil.

2) i have 2 brown wires joined to a single connector in a another harness. i have this single connector / 2 wire attached to A pole connector.

I'm looking at a wiring diagram,

1.) it shows a brown/white stripe wire (coming from the "31 / 1" slot on the CDI harness) going to B" on the coil. I assume that is the negative pole.
2.) it shows a white wire (coming from the "A" slot on the CDI harness) going to the "A" pole on the coil.

Thanks Charles

[cellison]

doing a better search and from what i think i read:

1.) the brown stand alone wire should attach to the negative pole on the coil?
2.) the white wire should attach to the "A" pole on the coil?
3.) I also have a brown/white wire with it's own separate connector. Does this attach to the negative or "A" pole on the coil?

Can you fry the coil if it is cross wired?

[M5guy]

On my stock 86 930, I have a white wire on the positive pole, and a brown/white wire on the negative pole. They both exit from the same piece of brown plastic insulation.

[cellison]

Thanks M5. so i just need to confirm where the solid brown wire goes.

[xbmwguy]

if i am not mistaken the solid brown goes to one of the lugs the coil bracket mounts to

[cellison]

Originally Posted by xbmwguy

if i am not mistaken the solid brown goes to one of the lugs the coil bracket mounts to

you are correct. that's what happens when you take something apart 2 months ago and don't label it. i'm such dumb a$$.

[HFR_Racer]

Glad you got your 930 running Charles....

[cellison]

I appreciate all the help and a advice, especially the calls and e-mails from several of you to follow up and keep me going. If it were not for this board i probably would not be a 930 owner.