Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   Pelican Parts Forums > Porsche Forums > 911 / 930 Turbo & Super Charging Forum

LinkBack Thread Tools Rate Thread
Thread Post New Thread    Reply
Registered User
Robbbyg's Avatar
Join Date: Aug 2008
Posts: 1,138
MSD Routing to 8 Pin Euro Anyone?

Lots of info on howtos on installing MSD ignition which ive followed,
but then car didnt start,
so i changed a couple of wires and it works but no tach go figure,

But im looking for a Correct how to on this,

I want the MSD Box wiring to go directly through the 8 (eight) Pin Harness that was connected to my EX CDI which i sold to pay for my go fast bits if at all possible.

Reason is because the less wiring through engine the better im trying to keep it minimalistic , sort of..

Anyone know of any paper write up on this, has anyone ever done it??

The Euro 8 PIN CDI as far as i know were only made in 76/77 and never avail in the US as far as i know but there have been exceptions here and there, so my chances are slim on this process i know.

Engine is 930 Euro Row 3.0 formerly with 8 pin Bosch CDI ,
Harness is still in bay to connect to see pic edit cant see it in pic but it is in there somewhere

Info needed MSD to Eur 76/77 8 PIN CDI Harness

Last row 1977 3.0 930 260hp built, still reassembling
Row 1998 996 MK1 3.4 296hp new daily driver
Old 04-01-2014, 07:51 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)

Thread Tools
Rate This Thread
Rate This Thread:


All times are GMT -8. The time now is 11:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.