![]() |
|
|
|
Registered
|
Head rebuilding/twin plug services?
I am thinking about large port heads for my car, IF I was to pick up a used set where might one send them for a rebuild, twin plug and maybe minor clean work?
|
||
![]() |
|
Registered
|
Craig Garrett (forum user "cgarr") would be my choice. He is in Grand Rapids.
__________________
'88 Coupe Lagoon Green "D'ouh!" "Marge - it takes two to lie. One to lie, and one to listen" "We must not allow a Mineshaft Gap!" |
||
![]() |
|
Registered
|
I'll second Craig Garrett, G2 Performance. He just did my 3.2 heads converting them to dual plug and to work with 98mm cylinders.
|
||
![]() |
|
Registered
Join Date: Jul 2005
Location: Atlanta
Posts: 1,241
|
+1 Craig is the best
__________________
No physical quantity completely explains its own existence |
||
![]() |
|
Registered
|
Yet another vote for Craig. Excellent work at a very reasonable price and a quick turnaround time. The seemingly impossible trifecta.
__________________
Mike '85 3.2C IG: @msmall90 | @zuffenphilly | @ruchlosrallye |
||
![]() |
|
Registered
Join Date: Sep 2015
Location: Costa Rica and Pennsylvania U.S.
Posts: 3,301
|
vote for Craig
I recently sent him one cylinder from 3 different sets of 98mm.He checked the Ra on them and sent them right back.On time person for sure.Fred
|
||
![]() |
|
![]() |
Registered
|
And one more positive for Craig. Quality work at a reasonable price, hard to find these days.
__________________
1986 Targa Guards Red 2021 MT09 SP |
||
![]() |
|
Registered
Join Date: Jul 2001
Location: mt. vernon Wa. USA
Posts: 8,711
|
+1 for Craig
__________________
[B]Current projects: 69-911.5, Previous:73 911X (off to SanFrancisco/racing in Germany).77 911S (NY), 71E (France/Corsica), 66-912 ( France), 1970 914X (Wisconsin) 76 911S roller..off to Florida/Germany RGruppe #669 http://www.x-faktory.com/ |
||
![]() |
|
Registered
|
It seems we have a consensus!
Craig did the stock valve job on my SC and was a pleasure to work with. John
__________________
82 911SC coupe |
||
![]() |
|