|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2013
Location: Brisbane, Australia.
Posts: 2,603
|
Rod LE Width Question
At the risk of exposing my ignorance (maybe it was exposed a long time ago), I'm trying to understand the sizing of the little end of a rod.
According to some other posts here, the LE width of a 3.0/3.2/964 rod is 24.13mm. What I'm trying to understand, is what is this dimension covering? Is it just the width of the steel rod, or is it the outer dimension of the edges of the protruding bushing. I have seen some shops linish the side of the bushing so that would decrease the outside dimension. Here are two pics I took of a 3.0SC rod with std bushing... one pic measures just the steel rod, the other pic includes the width of the bushing. Where does 24.13mm come from?  
__________________
Always learning. www.aircooledporsches.com.au See me bumble my way through my first EFI and TURBO conversion! https://youtu.be/bpPWLH1hhgo?si=GufVhpk_80N4K4RP |
||
02-09-2025, 02:36 AM
|
|
|
Registered
Join Date: Dec 2014
Posts: 13,860
|
__________________
House producers wanted to end the show after season 8 to keep the enigmatic appeal of the central character and maintain the show's mystique. Ahhh The Mystique!!! |
||
|
02-09-2025, 05:02 AM
|
|
|
Registered
Join Date: Jul 2013
Location: Brisbane, Australia.
Posts: 2,603
|
Where does 24.13mm come from?
Quote:
Slo where does everyone get this 24.13mm from?
__________________
Always learning. www.aircooledporsches.com.au See me bumble my way through my first EFI and TURBO conversion! https://youtu.be/bpPWLH1hhgo?si=GufVhpk_80N4K4RP |
||
|
02-09-2025, 11:34 AM
|
|
|
Registered
Join Date: Dec 2014
Posts: 13,860
|
Probably from taking the measurements and then the - allowance, just a guess. I wouldn’t worry about it.
__________________
House producers wanted to end the show after season 8 to keep the enigmatic appeal of the central character and maintain the show's mystique. Ahhh The Mystique!!! |
||
|
02-12-2025, 05:12 AM
|
|
