|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2003
Location: Warsaw, Poland
Posts: 10
|
Engine dimensions
What are the following 911 engine dimensions:
1. Lenght from gearbox mounting surface to the crank pulley (inc. pulley)? 2. Overall width? 3. Distance from the middle of the crank to the lowest point of the sump? Who can help me? |
||
12-08-2003, 07:09 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
I recently measured from the gearbox mount to the front of the fan pulley it was 20.5 inches. I do not have the other dimensions.
Hope that helps, neilca |
||
|
12-08-2003, 08:29 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Warsaw, Poland
Posts: 10
|
Thanks, neilca! Who else can help with other dimensions?
|
||
|
12-09-2003, 03:47 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
I got the rest of the measurements. 30 inches wide and 8.5 inches from the center of the crank to the bottom of the sump.
Hope that helps, neilca |
||
|
12-13-2003, 06:16 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Warsaw, Poland
Posts: 10
|
Many thanks, neilca! It is huge help for me. Thanks!
Ups i forgot one dimension: from the centre of crank to the top of fan housing. Could you do it for me one more time? Last edited by Yaninnya; 12-15-2003 at 03:50 AM.. |
||
|
12-15-2003, 01:00 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
I will be at my shop on Thursday. I will try to remeber to get that dimension.
|
||
|
12-17-2003, 04:20 AM
|
|
|
|
Registered
Join Date: Dec 2003
Location: Warsaw, Poland
Posts: 10
|
O.K. I'll wait. Thanks!
|
||
|
12-17-2003, 08:24 AM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
The fan I have is a five blade. I measured from the center of the crank to the highest point on the fan and it was......13.5 inches. This is a lot lower than the four cylinder with the 911 fan.
Good luck, neilca |
||
|
12-19-2003, 04:11 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Warsaw, Poland
Posts: 10
|
Many thanks one more time!
|
||
|
12-22-2003, 03:50 AM
|
|
