2.2 T carb set up??

[Va914]

Can someone tell me what a good set up (starting point) for some Weber 40's for 2.2T would be?

The carbs I have now have the following;
Idle____50
Mains__ 135
Airs ____180
Venturi__32mm

If they will not work what is a good place to get the new pieces I didn't see them in PParts.

Cheers

[jluetjen]

You can get the parts from PMO if they are not available from Pelican.

BTW - What emulsion tubes do you have?

Do you have any issues with the way the engine ran with that jetting?

[Va914]

New carbs (to me) going on a new to me 2.2 engine.

I don't know what the emulsion tubes size are.


I'll check with PMO.

[wirihana]

PMO supplied me carbs for my 2.2T and they came jetted as
follows:

venturi 32
main 130
Air 200
Idle 55
Emulsion tubes F11

to run on 91 RON fuel from, car operates from sea level to 2500 feet, and ran great.

interestingly enough richard recommended the same settings would be fine for my soon to be completed 2.4 with 2.2s pistons and e-cams for street.

for a step (racing etc) up he recomended the following for the 2.4e+

venturi 34
main 135
Air 190
Idle 55
Emulsion tubes F11 (or F16)

hope this helps.

nathan

[Va914]

Thanks..

Do you guys think it is worth trying to find someone looking for my set-up, from a 2.4L and swaping them for their 2.2 set-up?

I have 2.2 and don't think what I have will work. I'll start looking for the correct pieces.

Cheers

[Wayne 962]

We can supply all of these - just give us a call 1-888-280-7799.

-Wayne

[Va914]

Wayne, I was told by one of your sales guys you don't carry weber carb parts (Only linkage).

kerrys914@yahoo.com

[Wayne 962]

Talk to Tom at extension 221. Who did you speak with?

-Wayne

[Va914]

John Chi
Senior Porsche Sales Advisor