Cam tower spray bar steps

[JohnJL]

Thanks to everyone who posted on this previously. I would appreciate it if someone would confirm the steps for removing the spray bar in an 83 3.0 head. Is it just drill out/tap/pull the two plugs I am pointing to in the pics below? THere were some references to "location pins" in some past threads that I didn't understand.

Thanks

[afterburn 549]

yup

[Fishcop]

That's it. New ones are very cheap from Porsche

[afterburn 549]

As for me I tapped and put in pipe plugs for two reasons, can take it out with no fuss,and seems more fool proof then plugs.

[ChrisBennet]

There are "locating pins" part way down the tube that hold it in place. I've never removed the spray bars, I just R&R the plugs and clean them in place.
-Chris

[Fishcop]

You're right Chris. Those pins have (I think) a 8mm hex head and must be turned out before pulling the bars out.

[afterburn 549]

all thats true,just remember there is a right side up, and dwn to them, should you elect to take them out.