|
|
|
|
| Author |
|
|
Registered
|
Cylinder honing recommendations
If the Nikasil cylinders from my 3.2 measure OK, we intend to hone and re-use them.
Can anyone refer me to a machine shop who has done this? 
|
||
11-16-2005, 06:01 PM
|
|
|
Registered
Join Date: Jan 2003
Location: Langley,B.C.
Posts: 12,002
|
Check on page one or two of this forum and there is an extensive thread on this very subject that I started called "Do I need to hone this"
Cheers
__________________
Turn3 Autosport- Full Service and Race Prep www.turn3autosport.com 997 S 4.0, Cayman S 3.8, Cayenne Turbo, Macan Turbo, 69 911, Mini R53 JCW , RADICAL SR3 |
||
|
11-16-2005, 07:58 PM
|
|
|
Try not, Do or Do not
|
__________________
Henry Schmidt SUPERTEC PERFORMANCE Ph: 760-728-3062 Email: supertec1@earthlink.net |
||
|
11-25-2005, 01:51 PM
|
|
Porsche
Retor 911
Scarab
Riley
