|
|
|
|
| Author |
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
My original 90k engine never pulled studs. I confirmed that by checking the nut torque by tightening only with a mid range flex head Snap-On clicker during valve adjustment time.
The stock pistons don't last.
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
12-06-2005, 12:01 AM
|
|
|
Registered
Join Date: Jul 2004
Location: Bakersfield, Ca.
Posts: 477
|
Okay, here's the deal. Took my car to my mechanic and he was able to re-torque the heads. He said all the nuts tokk torque with no problem. Car is nice and quite and runs really good.
I'm going to cross my fingers and hope for the best. Thanks for all the replies... |
||
|
12-06-2005, 04:20 PM
|
|
|
Air Medal or two
Join Date: Jul 2003
Location: cross roads
Posts: 14,079
|
....................that's the symptom.......you can do that till it wont do that.
__________________
D troop 3/5 Air Cav,( Bastard CAV) and 162 Assult Helicopter Co- (Vultures) South of Saigon, U Minh Forest, Delta, and all parts in between |
||
|
12-07-2005, 07:22 AM
|
|
