|
|
|
|
| Author |
|
|
Registered
|
fan assembly
I'm busy putting my SC together and up to assembling my recond alternator . I have two different washer/spacer things that go on the alternator shaft. One I can find in Waynes book and goes behind the final nut. This looks like a stepped spacer. The other one is a dished spacer. If it was about 10 th smaller in diam it would fit into the bearing housing on the alternator, behind the fan.
Other than that, I can't find a home for it. Does the fan just go straight down on the bare shaft? Alan |
||
07-14-2006, 09:59 PM
|
|
|
Registered
Join Date: Aug 2005
Location: sydney australia
Posts: 138
|
As far as I know (my set up) the fan slips straight on to the keyed shaft then shims then the v belt half then shims (total shims must be 6) then a cupped washer over the shims then the nut.
__________________
'83 911SC |
||
|
07-15-2006, 05:24 AM
|
|
