![]() |
|
|
|
Registered
|
2.7 Carrera pistons 2nd Thread.
Dear Team, what are the correct tolerances & values for this pistons. Who knows whats wrong here.
See as well the aftermarket piston. ![]() ![]() |
||
![]() |
|
Registered
|
![]() ![]() Why is the Aftermarket piston 89.98 There should not be that value. |
||
![]() |
|
Registered
Join Date: May 2003
Posts: 3,346
|
What is it you are trying to determine? You have the measurement of the pistons. They seem to show up (at least very close) on your charts and a "2" for the Carrera RS chart. They also are the same size as the "1" on the 74-77 chart but so what. They are clearly 73 RS pistons. If you look at CIS pistons you'll see the difference.
-Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
![]() |
|
Registered
|
There should not be a 73 Carrara 2.7 piston with 89.98 according porsche charts.
|
||
![]() |
|
Registered
Join Date: May 2003
Posts: 3,346
|
You're right the number is 89.975 for the maximum on the "2" size. That is what I mean't by "at least very close" in my post. You are looking at a .005mm difference.
Are you trying to use these? Are you trying to replace them? Are you trying to buy new cylinders? What are you trying to accomplish? -Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
![]() |
|