|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2006
Posts: 195
|
3.2 Carrera EFI alternative ???
Hello guys,
As I need to buy : DME,DME harness,DME relay and AFM for my engine (3.2 Euro) I wonder if there is available an alternative engine EFI system that I can use in the place of the stock Motronic? Also one more question for the Motronic guys : The US and Euro DME harnesses are the same ? TIA, Jim 
|
||
03-03-2008, 01:50 PM
|
|
|
I would rather be driving
Join Date: Apr 2000
Location: Austin, TX
Posts: 9,108
|
Try a megasquirt. The only issue is that you will need to mount a new trigger wheel to the crank pulley. MS will not decode the flywheel teeth pattern. It will work based upon a MAP sensor that pulls signal from a vacuum port on the manifold. All you will need is the intake, throttle body injectors and fuel rails. Its a DIY type of system and most shops will not be familiar with it. This could be a plus or minus depending on how you approach car work.
__________________
Jamie - I can explain it to you. But I can not understand it for you. 71 911T SWT - Sun and Fun Mobile 72 911T project car. "Minne" - A tangy version of tangerine #projectminne classicautowerks.com - EFI conversion parts and suspension setups. IG Classicautowerks |
||
|
03-03-2008, 01:57 PM
|
|
