|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2005
Location: Netherlands
Posts: 8
|
Engine start after restoration
Can someone tell me how I should go about starting the engine after it has been sitting for a very long time. I have restored my 911T during the last couple of years and I'm almost ready to install the engine again.
I have replaced a lot of gaskets and seals but there is no oil in it. So after I have connected all of the oil lines etc and filled the tank with oil do I just crank it with the starter? How long will it take before the pump has fed all the bearings? Any ideas will be appreciated!! Thanks in advance! Hans |
||
04-02-2008, 09:44 AM
|
|
|
3 restos WIP = psycho
Join Date: Feb 2005
Location: North of Exit 17
Posts: 7,665
|
Wayne's book tells you, but if I recall correcly, pull the lead off the dizzy and crank it to build oil pressure. Once the oil is through the system, you can fire it up.
__________________
- 1965 911 - 1969 911S - 1980 911SC Targa - 1979 930 |
||
|
04-02-2008, 09:55 AM
|
|
