Is this piston OK to use (Picture of the nick)

[JMH82SC]

This piston is perfect in every way but once it was cleaned you could see the nick in the picture. Not sure what happened but it is more like a chip. No damage to cylinder and all looks but I wanted a second opinion.

[BURN-BROS]

It,s fine. Take a jewelers file and take down any high spots/ sharp edges that may have occured.

[Henry Schmidt]

Aaron, you brutal bastard! It looks like you'll use anything. I wouldn't let you near anything I own.

Next thing you know, you'll be welding a bolt in a wrist pin.
Perfection is always the goal

[BURN-BROS]

Originally Posted by Henry Schmidt

Aaron, you brutal bastard! It looks like you'll use anything. I wouldn't let you near anything I own.

Next thing you know, you'll be welding a bolt in a wrist pin.
Perfection is always the goal

You Sir, need to step away from all power tools and any innocent hydraulic presses.

[jpnovak]

I sense a few inside jokes between Henry and Aaron...

Thank you for the comic relief.