|
|
|
|
| Author |
|
|
Registered
|
Scraping sound
I've got a very light scraping sound coming from the flywheel area on my engine when I turn it over by hand. The engine in a 2.4S and its mating to a 901 trans. I put on a Fidenza lightened flywheel, a ring gear from Kennedy Engineering to adapt it to the 901 and then a Stage 1 clutch assembly also from Kennedy. The noise is not every revolution but rather seems every 1/4 or 1/6 of a turn. Along with the noise is a very light amount of resistance. Any thoughts?
|
||
05-05-2009, 01:33 PM
|
|
|
Registered
Join Date: Jul 2001
Location: Portland Oregon
Posts: 7,007
|
Sounds like either your flywheel is rubbing the case (not abnormal for Fidanza's) or the pressure plate bolts are doing the same,......
__________________
Steve Weiner Rennsport Systems Portland Oregon (503) 244-0990 porsche@rennsportsystems.com www.rennsportsystems.com |
||
|
05-05-2009, 02:14 PM
|
|
|
Registered
|
My thoughts too. Now I have to order new flywheel bolts yet again and take it apart to see what's up. It takes weeks for those parts to come all the way up here for me.
|
||
|
05-05-2009, 02:47 PM
|
|
1984 Other 356 Convertible D Replica 911T
