|
|
|
|
| Author |
|
|
Registered
Join Date: May 2008
Posts: 726
|
Bypass mod hole size, paging MBEngineering
Searching this site I came across this thread. MBEngineering suggests that the bypass mod hole needs to be a minimum hole size of 10mm, or "use a 10mm drill, any less will give you oil press' prob's." What kind of pressure problems are we talking about? I see the hole in my case measures about 9mm. A 3/8" (9.5mm) drill bit will not fit.
|
||
10-27-2009, 07:22 PM
|
|
|
Registered
Join Date: Jan 2005
Location: KENDAL,CUMBRIA, UK
Posts: 1,580
|
HI 4sd911
PM sent regards mike |
||
|
10-28-2009, 01:27 AM
|
|
